What Size Nut Is On A 2 Inch Ball

How to Measure The Size of a Nut

past Cody Sorensen

Ablestock.com/AbleStock.com/Getty Images

If yous've always establish yourself puzzled when trying to effigy out what size nut you need for a bolt, you lot're non alone. The many unlike sizes can be overwhelming and confusing. When yous larn that there is a U.s. standard measurement organisation and a metric measurement system, you lot might all but surrender. Regardless of these variations, measuring the size of a nut doesn't have to be a mystery. A nut has 5 means that information technology tin exist measured. When matching a nut to a bolt or a wrench to a nut, two of the ways to measure solve most of the mating problems.

Measuring Betwixt the Flats

Step 1

Lay the nut on a flat surface so that the hole lays affluent.

Step 2

Place the end of a measuring tape on ane of the flat sides of the nut'southward outer perimeter.

Stretch the tape measure out beyond the nut's diameter to the flat-side straight beyond from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to discover the measurement. If you count nine lines, the size is a 9-mm (millimeter) nut. If the nut is United states standard, count the smallest lines on the tape measure in sixteenths. Add the sixteenths together to find the size. If you lot count eleven lines, the size of the nut is 11/16. You tin also mensurate from indicate-to-point to find the "Whitworth system" measurement. Instead of measuring from flat to apartment, you measure out from bespeak-to-signal on the hexagon. These ii measurement methods aid you know what size wrench or socket to use on a nut.

Measuring for Diameter

Step ane

Lay the nut down as you did in Section 1. Set up the cease of the record measure at 1 side of the inner threads of the nut.

Stride 2

Stretch the tape measure to the other side of the inner threads of the nut.

Count the lines to observe the diameter of the threaded hole. Measure across the widest opening the threads make. This measurement will aid you friction match the thread bore of the nut with the thread bore of the commodities.

Measuring for Thread Coarseness or Fineness

Step 1

Count the number of threads along the inside thickness of the nut. Utilise a magnifying glass and a pivot to keep track of the threads.

Step 2

Write the total downward on a slice of paper.

Figure the threads per inch of nut thickness. A nut with xvi threads per inch has coarse threads, while a nut with twenty threads per inch is fine thread. If the nut is ane/iv-inch thick and that 1/iv-inch has 4 threads, the nut is fibroid-threaded. If the nut has five threads in that 1/iv-inch thickness, the nut is fine-threaded. To mensurate nut thickness, hold the nut betwixt your fingers and measure the perimeter parallel to the nut'due south hole.

References

Tips

Things Yous'll Need